Rust-Oleum CombiColor Original Satin Finish

Primer and topcoat in one
For application onto rust, bare metal
High coverage: 10.5 m² per litre
Sag resistant, no brush strokes
Usable down to 5°C
Satin Finish

Product Options

250ml Black RAL 9005

£8.49

Add

750ml Ready Mixed Colour

£20.49

Add

2.5 Litre Ready Mixed Colour

£52.95

Add

All prices include VAT

Info
Data Sheets
Delivery
Returns

RUST-OLEUM® CombiColor Metal 7300/7400 coating- is a primer and topcoat in one, based on a urethane modified alkyd, providing good drying properties at low temperatures. The product contains rust-inhibitive pigments and is lead- and chromate free.
RECOMMENDED USE -RUST-OLEUM CombiColor Original 7300/7400 should be applied on bare, manually derusted or with CombiPrimer Anti-Corrosion 3369/3380 primed steel. CombiColor Original is intended for brush and roller application and can also be applied by air spray. RUSTOLEUM CombiColor Original 7300/7400 offers corrosion protection in a light industrial environment. For metal structures in a more aggressive industrial environment, priorapplication of a RUST-OLEUM CombiPrimer Anti-Corrosion 3369/3380 is recommended.
DRY TIMES
Touch dry: 2 hours (20°C), 3 hours (10°C), 1 ½ hours (30°C)
Dry to handle: 8 hours (20°C), 16 hours (10°C), 6 hours (30°C)
Dry to recoat: 16 hours (20°C), 24 hours (10°C), 8 hours (30°C)
Fully cured: 7 days (20°C), 14 days (10°C), 5 days (30°C)
CVOVERAGE- 10.3 m²/litre
SURFACE PREPARATION- Remove oil, grease and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. Remove rust scale, loose mill scale,loose rust and loose coatings by scraping and wire brushing to St 3 (ISO 8501-1 : 1988), light blast cleaning or sanding. Sand intact coatings to roughen the surface slightly. The surface must be clean and dry during application. Galvanised, Zinc and Aluminium surfaces have to be primed first with CombiPrimer Tack Coat 3302.
DIRECTIONS FOR USE- please thoroughly stirred prior to use.
APPLICATION CONDITIONS- Temperature of air, substrate and coating material between 5° and 35°C
APPLICATION & THINNING-
BRUSH- up to 10% volume
ROLLER- up to 10% volume (Roller Application may require 2 coats to achieve recommended dry film thickness)
AIR-ATOMISED SPRAY-10-25% volume RUST-OLEUM Thinner 7301. Gravity cup and pressure cup. Tip size: 1.0 -1.5 mm. Atomising pressure: 2 - 4 bar.
Popular colours include black and white.
- DataSheet
- HealthSafety
Delivery Time

Next day delivery on orders placed before 2:30pm

This is for stock items when ordered on a working day.

Orders placed on a non working day or after cut off will be despatched the next working day on a next day service

This applies to Mainland UK only

Delivery Charge

Free Delivery on orders over £69.99

£6.95 for orders below this value

(Extra charges apply for non Mainland UK addresses)

We offer a trusted and tracked courier service to ensure your order arrives swiftly and in perfect condition.
We also deliver to the majority of non mainland UK locations including The scottish Highlands & islands, Isle of Man, Isle of Wight. Please see full delivery terms for the extra charges associated with these locations
Please return your unwanted product to us within 30 days for a refund on the item.

However we are unable to accept returns of any paint where we have mixed the colour for you on our mixing machines. This is bespoke for the customer and we are unable to re-sell it.
Any products marked DD (Direct Delivery) come direct from the manufacturer and therefore may incur a re-stocking fee.