Erfurt Mav Wallrock Power Adhesive

High performance extra strength ready-to-use wallcovering adhesive powered by Wallrock

Coverage - 1kg of paste to 5sq mts of area

Wallrock Power Adhesive is suitable for hanging all types of wallpapers - no mixing is required. The smooth, easy to use adhesive has excellent wet tack properties and slides easily for perfect hanging and pattern matching whether you choose to Paste-The-Wall or paste the paper wallcoverings.

Surface Preparation - Surfaces should be clean, dry, sound and free from loose paint, plaster, dust and mould.

Drywall and other absorbent surfaces must be sized and completely left to dry.

Sizing should be completed at least 4 hours before. Pasting And Hanging - Paste-The-Wall

Refer to wallpaper manufacturers label for specific instructions.

Applying the Paste (Paste the Wall) - For best result use a roller to apply Wallrock Power Adhesive generously and evenly to the wall. Ensure coverage of the wall from floor to ceiling is complete.

A coverage rate of 1Kg per 5m2 (2.2lb per 53ft2) is suitable for most products.

Applying the Paste (Paste the Paper) - Refer to wallpaper manufacturers label for specific instructions - eg. soak time etc.

Protect surrounding areas (floor coverings and furniture etc) from splashes and drips.

Paste wallpaper generously, ensuring that edges are fully covered with the paste, allow heavyweight papers to soak until supple,

A coverage rate of 1Kg per 5m2 (2.2lb per 53ft2) is suitable for most products.

Ensure edges are stuck to the wall.

Remove any paste from the face of the wallpaper and surrounding area immediately with a damp cloth or sponge.

Clean tools and equipment in warm soapy water.

Important