Barrettine All-in-One Decking Oil

Barrettine All-in-One Decking Oil is a highly versatile, Oil based finish decking oil that is ideal for treating and protecting wooden decking. It is specifically formulated for use on pressure treated and preservative impregnated timber offering superb protection to deck boards, deck tiles and balustrades. 

It’s easy to apply and dries quickly, creating a low-sheen finish that looks natural in all elements. With the additional benefit of being highly resistant to UV rays and rain, Barrettine All-in-One Decking Oil is an excellent choice for decking protection for deck boards, deck tiles and balustrades.

Also, Barrettine All-in-One Decking Oil achieves a superior finish to summerhouses, sheds and fences. Non-flaking and its water repellency help prevent the timber from splitting and cracking.

Overview - Barrettine All-in-One Decking Oil, is an oil-based decking stain that is perfect for all types of wooden decking, summer houses, sheds, fences and other garden wood. It’s a solvent-based formulation for deep penetration and enhancing the natural grain and beauty of wooden decking. Will not crack, peel or flake.

Looking for an anti-slip finish? Try Barrettine Anti-Slip Decking Oil, which can be applied as a top coat after applying Barrettine Decking Oil

Suitable for: Exterior use.

Preparation: Decked areas to be treated should be clean, dry and free from dirt, debris and other surface contaminants.

Application: Always do a test area before starting any project to check product suitability and final finish. Follow the manufacturer's instructions on the tin at all times. Apply with a paintbrush or paint roller.

 

Do not apply Barrettine Decking Oil in wet conditions or if rain, frost or snow is likely before the product is dry. Decked areas should be completely dry before application. Stir thoroughly before and periodically during application.

 

How to apply Barrettine Decking Oil: 

1. Apply a thin, even film of decking oil with a suitable decking applicator

2. Work the oil into the surface of the wood grain

3. Wipe off any excess oil with a clean, lint-free cloth

4. Allow the first coat to fully dry, then apply a second coat as above

5. Allow 24 hours to dry completely before heavy use

Two coats of the Barrettine Decking All-in-One Decking Oil are usually sufficient, but this may vary depending on the type and condition of the timber to be treated.

Coverage: 1 coat up to 8 sq metres/litre of smooth timber and up to 5 sq metres on rough sawn timber, 2 coats recommended.

Drying times: normally 24-48 hours in ambient temperature. Apply the second coat after 48 hours.

Clean equipment: with Brush Cleaner, White Spirit or Bio Spirit.

Colours: The colour swatches are an indication only and representative of the product applied to clean new/pale timber. The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour.

Popular colours include amber light oak, clear, dark oak and natural oak.

 

If you have any further queries about Barrettine Decking All-in-One Decking Oil or our other Barrettine products, please do not hesitate to contact us.